Overview
Leyland Trade's Acrylic Primer Undercoat is a general purpose water based primer undercoat, suitable for interior and exterior bare surfaces. As well as being easy to apply, it's low odour and quick drying, so you can apply two or three coats in one day.
- Suitable for plaster, bare timber, MDF, drywall and render
- Quick Drying
- Primer and Undercoat
| Area | Interior & Exterior |
| Recommended Use | Wood, plaster, concrete, cement rendering, brickwork and blockwork. |
| Base | Water-Based |
| Coverage | Up to 13m² per litre |
| Drying Time | Touch dry in 30 minutes under normal conditions |
| Re-Coat Time | 1-2 Hours |
| Recommended Coats | 1-2 Coats |
| Application Method | Brush or Roller |
| VOC Levels | Low |
| Clean Up | Remove as much of the Primer Undercoat as possible from your brush or roller and clean in warm, soapy water. Rinse thoroughly. |
Preparation
Make sure that the surface is sound, clean, dry and free from grease.
- Use a fine waterproof abrasive paper to rub down any bare timber to remove any sharp edges or raised grains.
- Apply Knotting Solution to knots and resinous surfaces.
- Use a fine waterproof abrasive paper to provide a key if you're painting previously painted surfaces. Wear a suitable face mask if dry sanding. Pre-1960s paint removal over wood and metal need special precautions as they may contain harmful lead.
Application
Always perform a test on a small inconspicuous area to ensure compatibility, and we recommend following the manufacturer's instructions found on the tin.
- Stir well before use. Apply generously by brush or roller, firmly into the surface.
- Be sure to treat the end grain as wel as the main surface of any timber.
- If you are applying a gloss finish, add a second coat of the Leyland Acrylic Primer Undercoat, which makes a great undercoat for the gloss paint.
- Apply in temperatures of 10 degrees celsius or above and avoid applying when it's likely to rain.
